|
|
Extension of WinCC program - parameterisation of PLC application
Sysel, Radek ; Pásek, Jan (referee) ; Štohl, Radek (advisor)
The aim of bachelor´s thesis is to propose parameters PLC applications and introduce a management system for steam turbines manufactured by Siemens in Brno. Be familiar with WinCC visualization program and link it with Simatic STEP7, which then communicates with the PLC. Subsequently, on the basis of this knowledge to create a functional application that is integrated into their applications. The functional application and their application will coordinate with each other. After the theoretical design I came to the practical implementation of the application. First, I prepared the functional blocks in STEP 7. Then I went to the graphic’s implementation in WinCC program. In conclusion, I verified the functionality and I stated the other direction to which the application should take.
|
|
|
Motion detection based on an accelerometer measurement
Štancl, František ; Šimek, Milan (referee) ; Pál, Tamás (advisor)
This thesis is devoted to detect motion and it is focused on energy consumption. The introduction involves possible ways for acceleration measuring and discusses The MEMS technology in accelerometers. It also describes components used in a low-power module and some suggestions leading to resolution of this issue. This thesis includes the module design as well, PCB design and software equipment. Finally, it evaluates the results and the solution accuracy.
|
|
|
Module for The Smart Home
Vančo, Erik ; Novotný, Radovan (referee) ; Levek, Vladimír (advisor)
The presented thesis deals with the design of the product for intelligent control system for GILD. The first part of the diploma thesis contains a brief summary of the intelligent control system. The thesis is designed schematic diagram of the product, it is also designed printed circuit board according to the product requirements. An integral part of the diploma thesis is the design and implementation of the service algorithm for the product.
|
|
|
Web interface for a measurement module
Łabudek, Daniel ; Kuběna, Tomáš (referee) ; Zezulka, František (advisor)
The work solve the design and implementation of web application to measure analog inputs, setting and measuring the digital input and output of the measuring module based on microcontrollers ATMEL ATMEGA64. For connecting to internet is use a module LanReach by company Connectone. Measured values are displayed on the website or send via e-mail messages.
|
|
|
Interned based measurement system
Dobrovolný, Petr ; Kozák, Tomáš (referee) ; Zezulka, František (advisor)
The work is deal with the measuration and distribution of data using microcontroller ATmega64. The measuring system connect is done by Ethernet controller ENC28J60 in communication networks. Communication protocols TCP / IP are taken advantage of transfer data to user. Data view is dealt with the HTTP protocol through the use of HTML code. Web browser are used for disclosure of information. Web page uploading can be replenish with current analogue and digital values using the tags created for this measuring system.
|
|
|
Algortihm Optimization Using SIMD Instructions
Sedláček, Marek ; Rydlo, Štěpán (referee) ; Orság, Filip (advisor)
This thesis talks about techniques which can be used to optimize run time of algorithms. For a demonstration of these techniques algorithms from different fields were chosen, namely particle swarm optimization, circle drawing algorithm and image (matrix) rotation algorithm. These algorithms were written in Python 3, C language and assembly language using SIMD instructions. While writing these codes emphases was placed on code efficiency. These practices were in this thesis described and compared, same as the impact on algorithm optimization. Performed tests upheld expected potential of SIMD technology for optimization, but also that this approach cannot be used in all cases. In case of circle drawing the SIMD approach achieved more than ten times better speeds than the serial implementation in C and more than one thousand times better speed than Python 3 implementation. In case of particle swarm optimization the result was opposite -- serial C implementation achieved a better speed than SIMD implementation.
|
|
|
Control of the A2000 device via WEB
Łabudek, Daniel ; Kozák, Tomáš (referee) ; Zezulka, František (advisor)
The work is solving the design and implementation of application for presentation measured data and control of A2000 device trought web interface. For connecting to internet is used a module LanReach by company Connectone. Measured values are displayed on the website or send via e-mail messages and saved on FTP server.
|
|
|
Present-day Programming Method of Microcontroller
Medla, Eduard ; Matyáš, Pavel (referee) ; Zuth, Daniel (advisor)
This bachelor thesis is dedicated to modern methods of programming microcontrollers. In this work are examined some programming languages, various programming environments and graphic editors. In every methods of programming are explained their advantages and disadvantages. Here are two examined methods of loading program to microcontroller, so called flashing. Choosed method is programming language C, which was used to programme two-state regulator with hysteresis in environment AVR Studio 6.2.
|
|
|
Algortihm Optimization Using SIMD Instructions
Sedláček, Marek ; Rydlo, Štěpán (referee) ; Orság, Filip (advisor)
This thesis talks about techniques which can be used to optimize run time of algorithms. For a demonstration of these techniques algorithms from different fields were chosen, namely particle swarm optimization, circle drawing algorithm and image (matrix) rotation algorithm. These algorithms were written in Python 3, C language and assembly language using SIMD instructions. While writing these codes emphases was placed on code efficiency. These practices were in this thesis described and compared, same as the impact on algorithm optimization. Performed tests upheld expected potential of SIMD technology for optimization, but also that this approach cannot be used in all cases. In case of circle drawing the SIMD approach achieved more than ten times better speeds than the serial implementation in C and more than one thousand times better speed than Python 3 implementation. In case of particle swarm optimization the result was opposite -- serial C implementation achieved a better speed than SIMD implementation.
|
|
|
Module for The Smart Home
Vančo, Erik ; Novotný, Radovan (referee) ; Levek, Vladimír (advisor)
The presented thesis deals with the design of the product for intelligent control system for GILD. The first part of the diploma thesis contains a brief summary of the intelligent control system. The thesis is designed schematic diagram of the product, it is also designed printed circuit board according to the product requirements. An integral part of the diploma thesis is the design and implementation of the service algorithm for the product.
|
guest ::
